Who's responsible for what?
Make sure somebody is responsible for each of the following:
(this is not intended as a complete list, it is merely representative of the type of things employees should be trained on with thin saws.)
WOOD
proper drying - without undue stress (etc, etc.)
culling worst defects
MACHINE
purchasing appropriate make and model
customizing/modifying/jigging as needed
alignment/setup
normal operation
clearing jam-ups
routine maintenance
repairs
SAWBLADES
purchasing/producing adequate quality
installing/setting up on machine
deciding when to remove for sharpening
doing the sharpening (& retipping, etc.)
deciding when to remove from service completely
COLLARS/SPACE
purchasing/producing adequate quality
keeping in good condition
Comentários